Filter
Top Products
Chapter 8 Knob Functions 197
CHAPTER 8
8.4 Parameter Descriptions
SOUND Group
These parameters control sound output quality by adjusting the waveform playback.
LEVEL
Range: 000 to 127
Default: 100 (on all sample tracks)
077 (on AUDIO IN track)
127 (on MASTER track)
Works on: All tracks
Controls the sound level of the track’s playback. Turn the knob right to increase the
level, or left to decrease it. A value of 000 cuts off the sound.
On sample tracks: The setting controls the output level to all available output desti-
nations (stereo outputs, headphones, and—if the AIEB1 board is installed—the digi-
tal and assignable outputs).
On AUDIO IN: The setting controls the output level to all available output destina-
tions (stereo out and headphones only).
On MASTER: The setting adjusts the output level to the outputs, headphones, and
digital outputs—but has no effect on output to the analog assignable outputs.
NOTE:
The MASTER VOLUME dial operates in much the same way as the MASTER-track setting,
but does not affect the level to the digital outputs.
PAN
Range: L64,...,L01, C, R0,...,R63
Default: C
Works on: All tracks
Controls the pan (the left/right sound position). The default is C (center). Higher “R”
values move the sound to the right; higher “L” values moves the sound to the left.
Turn the knob clockwise to move sound to the right, or counterclockwise to move it
to the left.
If you are playing a stereo sample, the pan operates like a conventional balance con-
trol.