Filter
Top Products
Chapter 10 Jobs
254 Chapter 10 Jobs
EXAMPLE:
Assume you want to insert 4 measures between measures 2 and 3, and that you want
these new measures to have a meter of 2/4. You would set the screen values as follows:
1:1 2:1 3:1 4:1 5:1:2 :3 :4 :2 :3 :4 :2 :3 :4 :2 :2:3 :3:4 :4
••••
1:1 2:1 3:1 5:14:1 7:16:1:2 :3 :4 :2 :3 :4 :2 :2 :2 :2 :3:2 :4 8:1 :2 :3 :4 9:1 :2 :3 :4
••••
:1 :2 :1 :2 :1 :2 :1 :2
Procedure
1.
Be sure that the song you want to add measures to is currently selected.
You may find it convenient to stop the song at the location at which you wish to in-
sert the new measures. (For example, if you want to insert new measures between
measure 5 and measure 6 of the song, stop the song at measure 6.)
2.
Press EVENT EDIT | MEASURES.
3.
If necessary, turn the dial to select ADD MEASURES. Then press [OK].
▼ The screen displays the three parameters: insertion position, number of measures to
insert, and the meter to be used for the new measures. The first parameter is flash-
ing, indicating that you can change its value by turning the dial.
ADD M003 004 2/4
Sequence events
LOOP-track playback
FREE-track playback
Sequence events
LOOP-track playback
FREE-track playback
Meter for new measures
(Number of beats in
each new measure).
Number of
measures to be
inserted.
Insertion position.
(Default is the song’s
current measure
location)