Filter
Top Products
Chapter 10 Jobs
276 Chapter 10 Jobs
6.
Press [OK].
▼ The screen displays DEST. TRACK, prompting you to select the destination track.
7.
Select the destination track.
You can select any sample track, with the exception of the source track itself.
8.
Press [OK].
NOTE:
If you select a nonempty destination track, the screen displays the
REPLACE SAMPLE?
message, warning you that the operation will overwrite the sample already existing on
the destination track. If you wish to proceed, press [OK]; otherwise press [CANCEL] as
necessary to move to a previous level or to escape from the job. Note that the existing
sample on the destination track will not be lost until you reach step 10 below.
▼ The screen displays PRESS START/STOP, indicating that you can begin resampling
by hitting the [SAMPLING] button.
9.
Hit the [SAMPLING] button to begin resampling.
▼ Resampling begins. You can hear the sound of the playback through your head-
phones or speakers. The screen updates the available sampling time as sampling
proceeds.
NOTE:
If you are not happy with the way recording is going, you can press [CANCEL] once to
return to step 5 above, or several times to escape from the job. If a sample already exists
on the destination track, that sample will not be overwritten until you proceed to step 10
below.