Filter
Top Products
Chapter 10 Jobs 235
CHAPTER 10
Brackets
indicate
selected
track.
Track’s current setting.Selected Bank
●
The setting works separately for notes recorded in the song (recorded note
events ) and notes generated by realtime playback. If you set the value to
SINGLE, for example, then the track can actually play two notes at a time: one
generated by the song and one played by you in real time.
●
The difference between these two settings can be illustrated as follows.
NOTE
ON
NOTE
ON
NOTE
ON
NOTE
ON
NOTE
ON
NOTE
ON
If ASSIGN=MULTI
Sound
If ASSIGN=SINGLE
Procedure
Be sure that you have selected the song containing the track(s) that you want to set up.
1.
Press TRACK SET | NOTE ASSIGN to enter this job.
▼ The screen appears as follows. The bank number and meter bracket indicate the
currently selected track (the last pad you pressed, except that if this was AUDIO IN
or MASTER then the fourth FREE track of the current bank).
2.
If necessary, change the track selection by pressing the appropriate bank selector and
pad.
3.
Turn the dial to select the setting.
4.
Repeat Steps 2 and 3 as necessary to review and change settings on all tracks you are
interested in.
5.
Press [OK] or [CANCEL] to return to the main screen.