Filter
Top Products
Chapter 2 Tutorial 105
CHAPTER 2
2.
Rotate the dial to select “LOOP LENGTH,” and press the [OK] button.
3.
The current loop length (which was set automatically) will be displayed. Rotate the
dial to make the display read “LOOP LENGTH=008,” and press the [OK] button.
● BPM setting
Press the sequencer
button, and while you listen to check that LOOP 1 (drums)
and LOOP 2 (bass) are suitably synchronized, set the BPM. Press the [BPM] button,
and set the BPM display to “172.0.”
MEASURE
BPM
NOTE
● Adjusting the volume balance
Let’s adjust the volume balance between the LOOP 1 track and the LOOP 2 track.
Procedure
1.
Press the SOUND/[LEVEL] button.
2.
Press the LOOP 1 pad. The display will numerically indicate the volume level that is
currently specified for the LOOP 1 track.
Use the knob for the LOOP 1 track to set “LEVEL=127.”
3.
Next press the LOOP 2 pad, and rotate the knob for the LOOP 2 track to set
“LEVEL=075.”
This ends our work on the LOOP 1 and LOOP 2 tracks.
Next we will work on the COMPOSED LOOP tracks.