Filter
Top Products
Chapter 10 Jobs 273
CHAPTER 10
Notice the difference between this job and the TRACK COPY job. For a TRACK
COPY job, the SU700 simply copies the sample waveform and the various knob set-
tings from one track into another. For a resample job, however, the SU700 records a
new sample, using as its sound source the existing sample as modified by the existing
sample’s knob settings.
Source Track Destination Track
Notice that the copy operation replicates the waveform, while the resample op-
eration changes the waveform so as to incorporate the source track’s knob set-
tings. Following the resampling, the destination track (with its knob settings set to
their defaults) will produce the same sound as the source track under its original,
user-adjusted knob settings.
Note that you can use resampling to magnify knob effects to any desired de-
gree. Suppose, for example, that you want to apply an extremely high resonance to a
sample recorded on track A. To do this, you can set the track A resonance to its maxi-
mum, then resample the sound onto track B. You can then set the resonance on track
B to its maximum and resample the sound back onto track A. You can repeat
resampling as many times as you like so as to build the desired changes directly into
the waveform.
Sample
LEVEL=60
PAN=R16
.
.
.
EFFECT3=50
LEVEL=60
PAN=R16
.
.
.
EFFECT3=50
Knob
Settings
COPY
Waveform is
identical
Settings are
identical
Sample
LEVEL=60
PAN=R16
.
.
.
EFFECT3=50
LEVEL=100
PAN=C
.
.
.
EFFECT3=000
Knob
Settings
PLAY
Waveform modified
accourding to source
Knob settings
Knob settings
are set to
defaults.
TRACK COPY
TRACK RESAMPLE
RECORD AS
NEW SAMPLE