Filter
Top Products
Chapter 10 Jobs 231
CHAPTER 10
10.3.2 TRACK SET Group
You use the jobs to set up the operation of each track for the current song. The set-
tings you make here significantly affect the sound of the song. These settings are
stored together with the song when you save the song to volume on disk, and are
restored when you reload the song from the volume.
What The Jobs Do
MAIN Sets the default action for the selected track’s knob and pad.
FILTER TYPE Sets the type of filter applied to the selected track.
NOTE ASSIGN Selects whether the track is capable of playing multiple (overlap-
ping) instances of itself at the same time.
TRACK SETUP Sets various playback parameters for the track. Specifically, sets
the track’s BPM tracking method, the loop length, the output desti-
nation (if the optional AIEB1 board is installed), and the LFO
waveshape.
TRACK SET | MAIN
Use to: Set (or view) the main knob function and main pad function for each
track.
●
Main functions refers to the functions assigned to the track’s knob and pad when
you are playing a song while the main screen is on the display. When you are
playing from a function screen, these main functions are overridden and all
knobs and pads perform the actions identified on the screen. (For more infor-
mation about the main screen and function screens, see page 144).
●
Default settings (power-on settings) and allowable settings for each track type are
as follows.
Track Type Knob Function Pad Function
Sample Default Possible Default Possible
tracks
LEVEL Any function PLAY PLAY,
(LEVEL, PAN, ..., ON/MUTE,
EFFECT2, EFFECT3)
*1
LOOPRST
*2
AUDIO IN LEVEL LEVEL, PAN, EFFECT1, EFFECT2, NONE
*3
ON/MUTE
EFFECT3
MASTER LEVEL LEVEL, PAN, HI GAIN, HI FREQ, NONE
*3
ON/MUTE,
LO GAIN, LO FREQ, EFFECT1, LOOPRST
EFFECT2, EFFECT3
*1: Exception: SOUND/[LENGTH] function is available on LOOP tracks only.
*2: For FREE tracks, the LOOPRST setting is meaningless; pad presses will be ignored.
*3: NONE means that pad presses are ignored.