Filter
Top Products
Chapter 2 Tutorial 51
CHAPTER 2
Dial
[OK] button
3.
Now turn the dial as necessary so that the screen says AUDIO IN. Then press [OK].
Then turn the dial again (if necessary) so that the screen says AUDIO␣ IN=LINE. Then
press [OK] once more.
With this setting, the included audio CD can be used as a source for sampling.
NOTE:
You can also supply sound through a microphone connected to the ANALOG IN
input(s), provided that you first set
ANALOG INPUT
to
MIC
. If you have installed the
optional AIEB1 board (optional I/O expansion board), you can also record samples di-
rectly through the board’s OPTICAL or DIGITAL connectors.
4.
Press the [SAMPLING] button. The screen displays the SELECT TRACK message.
NOTE:
• If sampling memory is already full when you try to record a sample, the screen will
display MEMORY FULL. If this occurs, press [CANCEL] to return to the main screen,
and then delete or reduce the size of the samples you have already recorded.
• If you have specified digital input for AUDIO IN, one of the following error messages
may be displayed.
”DIG-IN UNPLUGGED”
Digital input connections have been broken, and the PLL lock has been broken.
”DIG-IN PARITY ER”
A parity error has occurred in the digital input.In either case, press the [CANCEL]
button to exit sampling mode, and resolve the problem before you continue.