Filter
Top Products
Chapter 2 Tutorial 43
CHAPTER 2
3.
Now press the [PLAY] pad-function button, so that pads can be used to play the
samples.
Now you can use the pads to play the samples. Try pressing the pad for each track to
hear the sample. By doing this you can identify all of the song’s samples and the
tracks they are located on.
■ Adjusting the Levels
The sound from each track is conditioned by numerous parameter settings. These are
called knob settings, since you control them using the track knobs. First you select the
parameter you want to control by pressing the corresponding button on the Knob
Function panel. You can then adjust the values on each track by turning the knobs.
Let’s try using the knobs to adjust the level on each track (sample) — just as you
might on a conventional mixer.
1.
Press the SOUND/[LEVEL] button on the Knob Function panel.
◆ The display switches to the function screen illustrated below. The track meter
for each track indicates the track’s current LEVEL setting. The numerical
LEVEL value (127 in the figure below) shows the precise level setting for the
track whose pad or knob you last operated. The twelve knobs will now adjust
the volume level of the corresponding track.