Filter
Top Products
Chapter 2 Tutorial 115
CHAPTER 2
2.4.8 Track mixing
Now that we have recorded all of our samples, let’s adjust the volume balance be-
tween tracks.
Procedure
1.
Press the PAD FUNCTION [ON/MUTE] button, and then press the MASTER track pad
twice to defeat muting for all tracks. (All tracks will now be able to sound.)
2.
Press the PAD FUNCTION [PLAY] button, and then press the SOUND/[LEVEL] but-
ton.
3.
Press the sequencer button to loop-playback the LOOP 1/2 and COMPOSED
LOOP 1/2/3/4 tracks.
4.
Adjust the volume of the LOOP 1/2 and COMPOSED LOOP 1/2/3/4 tracks, using
their respective knobs.
5.
While you listen to the loop playback of the LOOP and COMPOSED LOOP tracks,
press the pads of FREE tracks 1–4, and use their knobs to adjust the volume of each
track.
6.
Use the MASTER track knob to adjust the overall volume.
NOTE:
• You can also use the MASTER VOLUME knob located at the upper right of the panel
to adjust the overall volume, but the setting of this knob is not recorded in the song.
The settings of the MASTER track knob are recorded in the song.
• Level settings used for the finished demo on the CD
Settings for section B (0041:1–056:4)
LOOP 1 ............................127
LOOP 2 ............................048
COMPOSED LOOP 1...... 078
COMPOSED LOOP 2...... 078
COMPOSED LOOP 3...... 035
COMPOSED LOOP 4...... 022
FREE 1 ............................110
FREE 2 ............................079
FREE 3 ............................063
FREE 4 ............................110
MASTER ......................... 127