Filter
Top Products
Chapter 10 Jobs 257
CHAPTER 10
EXAMPLE:
The following shows what happens when you copy sequence data from a single measure
(measure 2) of a given track and insert the copy three times starting from measure 10 of
the same track.
1:1 2:1 3:1:2 :3 :4 :2 :3 :4 :2 :3 9:1 10:1 11:1 12:1 13:1 14:1:2 :3 :4 :2 :3 :4 :2 :3 :4 :2 :2:3 :3:4 :4
•••• ••••
ABCDEFGH EFGHEFGHEFGHWXYZABIJ GHIJ
Procedure
1.
Be sure that the song you want to work in is currently selected.
You may find it convenient to stop the song at the first measure from which you want
to copy data.
2.
Press EVENT EDIT | MEASURES.
3.
If necessary, turn the dial to select COPY MEASURES. Then press [OK].
▼ The screen displays SOURCE TRACK, and the bank number and meter bracket in-
dicate the currently selected track (the last pad you pressed).
4.
Press a bank selector and track pad (as necessary) to select the track from which you
want to copy the sequence data. Then press [OK].
▼ The screen displays FROM M
xxx
-
yyy
, prompting you to select the measures from
which you want to copy data. As the default,
xxx
and
yyy
are both set equal to the
song’s current location.
5.
Adjust the values to select the segment from which you want to copy sequence data,
using
and to move among the two parameters, and the dial to set each
value.
▼ The first value gives the starting measure; the second value gives the ending mea-
sure. If you set the values equal, the job will copy data from one measure only.
123
Sequence data