Filter
Top Products
Chapter 10 Jobs
306 Chapter 10 Jobs
<CONTROL NUMBERS>
Use this job to set the MIDI controller number (control-change number) associated
with each knob function. Specifically, the settings you make here determine (a) the
outgoing control-change messages generated by SU700 knob action, and (b) the func-
tions controlled by incoming control-change messages received from an external
MIDI device.
As an example, suppose that the LEVEL function is set to 007. (Note that 007 is the
standard MIDI controller number for the “main volume” control-change message.) In
this case, then, any time you turn a knob that is assigned to the LEVEL function, the
SU700 will transmit a 007 control-change message over the track’s MIDI Transmit
channel (assuming that such a channel is set), thereby changing the main volume at
the external device. In addition, any incoming 007 control-change message will
change the level on the track (if any) whose MIDI Receive channel matches the chan-
nel on which the message is received.
You can set controller numbers for the 17 functions listed along the left below. The
values at right are the defaults; available values are OFF, 001,...,095. Note that all nu-
merical settings must be unique; the SU700 will not allow you to set the same num-
ber for multiple parameters.
LEVEL 007
PAN 010
PITCH OFF
ATTACK 073
RELEASE 072
SAMPLE LNGTH OFF
LFO SPEED OFF
LFO AMP DPTH OFF
LFO FIL DPTH OFF
LFO PIT DPTH 01
EQ HI GAIN OFF
EQ LO GAIN OFF
FILTR CUTOFF 074
RESONANCE 071
EFFECT 1 OFF
EFFECT 2 OFF
EFFECT 3 OFF