Filter
Top Products
Chapter 10 Jobs
264 Chapter 10 Jobs
<REVERSE>
This job reverses the waveform so that the sound is reversed-producing the same type
of sound that you would get by rotating a vinyl record backwards or by playing a tape
in reverse.
Hello••• •••olleH
REVERSE
When you run the job, the SU700 reverses the waveform and then gives you a chance
to listen to the results to determine whether you wish to keep the change. If you are
not pleased with the sound you can cancel the job and retain the original waveform.
Procedure
Be sure that you have selected the song containing the sample(s) you want to work on.
1.
Press SAMPLE | PROCESS.
▼ The track brackets indicate the currently selected sample track. The screen briefly
displays PROCESS, and then displays the name of the last process job that you se-
lected.
2.
If the screen displays a job name other than REVERSE, turn the dial so that the name
changes to REVERSE.
3.
Select the track containing the sample you want to work on by pressing the appropri-
ate bank selector and/or pad. Then press [OK].
NOTE:
If you select an empty track, the screen displays NO SAMPLE. Select a different,
nonempty track.
▼ The screen displays the name of the sample existing on the selected track.
4.
Press [OK].
▼ The SU700 reverses the waveform. The screen may display a “processing” pattern
while processing is in progress. When processing is finished, the screen displays the
word FINISHED.