Filter
Top Products
Chapter 2 Tutorial
70 Chapter 2 Tutorial
●
For each sample, set the sampling grade to “22K 8BIT MONO L.”
The sampling procedure is the same as for the LOOP 1 track. (→ p.50)
When sampling to track bank 1, press the TRACK BANK button [1] before selecting
the sampling track (the “SELECT TRACK” display). When sampling to track bank 2,
press the TRACK BANK button [2].
Example: to select TRACK BANK=2 and FREE track 1
2.3.8 Adjusting the levels of each track
Now that all samples have been recorded, let’s adjust the sound levels on each track,
so that the levels are correctly balanced.
Procedure
1.
Set all mutes off. Press the [ON/MUTE] pad-function button, then hit the MASTER
pad either once or twice so that the MASTER track’s mute is off (so that the MASTER
track brackets are visible).
▼ When you set the MASTER mute off, all mutes go off.
2.
Press the [PLAY] pad-function button, so that you can use the pads to play the
samples. Then press the SOUND/[LEVEL] button on the Knob Function panel, so that
all knobs will control the LEVEL setting.
3.
Press to start playback. As playback proceeds you will hear sound coming from
both LOOP tracks and all four COMPOSED LOOP tracks.
4.
Turn the knobs on the LOOP and COMPOSED LOOP tracks to adjust the level on
each of these tracks. Adjust so as to get a good balance.
5.
With the sequencer still playing, adjust the sound for each of the FREE tracks. For
each of these tracks, hit the pad to play the sound, and turn the track’s knob to adjust
the level. (See “Note” below.)