Filter
Top Products
Chapter 2 Tutorial 121
CHAPTER 2
■ Storing settings for type A sounds in the scene buttons
First we will store settings to the scene buttons for the song sections which use type
A sounds on FREE tracks 1–4.
● Section A = scene button [C]
We will mute only the CL4 and CL4 tracks, and store these settings to scene button
[C].
LOOP C.LOOP FREE
1 2 1234 1234
××
Procedure
1.
Press the PAD FUNCTION [ON/MUTE] button.
2.
Press the pads of CL tracks 3 and 4 to mute them (so that they will not sound).
3.
Press the PAD FUNCTION [PLAY] button.
▼ This completes the mute settings. Since the FREE tracks 1–4 are currently set to type
A sounds, we will store these settings in scene button [B].
4.
Set the [SCENE/MARKER] switch to the SCENE position.
5.
Press and hold the [B] button until the display indicates “SCENE STORED.”
6.
Release the [B] button. The scene has been stored.
to the SCENE position