Filter
Top Products
1Install and cable a G600 cabinet
Install and wire telephones and other equipment
S8100 Installation and Upgrades 103
November 2003
Analog tie trunk example
Figure 26: Analog tie trunk cross-connect
1 Before installing the Tie Trunk circuit pack, set the option switches as described in TN760E
option-switch settings and administration on page 268.
2 Install cross-connect jumpers to connect the pins from the Tie Trunk circuit pack to the
appropriate leads on the external tie trunk. Determine names of the tie trunk leads from the
manufacturer or supplier of the external trunk circuit. The example in Figure 26, Analog tie trunk
cross-connect, on page 103 shows an external tie trunk connected to a DS1 Interface circuit pack.
3 Administer on the Trunk Group form. See Administrator’s Guide for Avaya Communication
Manager (555-233-506).
Digital tie trunk example
Figure 27: Digital tie trunk wiring
Figure notes
1 External trunk or adapter 2 Tie Trunk circuit pack
Figure notes
1 External trunk
2 DS1 Interface circuit pack, position 1CA06
3 LO
4 LO (balanced output pair)
5 LI
6 LI (balanced input pair)
tie
_
wire RBP 040596
1
27
26
29
4
30
5
2
28
3
31
6
T1
R1
T11
R11
E1
M1
T2
R2
T12
R12
E2
M2