Filter
Top Products
G GAS commands in bash
Other commands
334 S8100 Installation and Upgrades
November 2003
Set WINS addresses
If the customer is using WINS you can set WINS information with the setip wins=[ip-addr-
primary[,ip-addr-backup]]. This will set the IP address of the primary and secondary IP addresses for
the windows NetBios on the TCP name server.
Ex: setip wins=155.9.145.1,155.9.145.4
After setting the customer’s WINS IP address, the setip command displays the new and the old settings.
Once you have set every appropriate settings for your location, enter reboot nice to restart the system with
the new settings.
Other commands
ftpserv command
The ftpserv command is executed from a console bash shell and turns on the FTP server. If you attempt
to ftp into the S8100 and receive a connection refused message, then ftp is not running.
To turn on FTP, enter ftpserv.
To turn off FTP, enter ftpserv -c.
statapp command
The statapp command is used from a LAC bash shell to determine the current status of each application.
Table 58: Example: S8100-avaya1>statapp
W2000 12/10 UP
W2000 WEB 1/1 UP
W2000 TERMSERV 1/1 UP
W2000 Console 1/2 in use
CoResServ 5/5 UP
Communication
Manager
51/51 UP
SNMP 3/3 UP
CornerStone 4/4 UP
AUDIX 15/33 PARTIALLY UP
AUDIXNet 0/5 DOWN
MISC 24/0 UP