Filter
Top Products
Checklists and job aids
Initial installation
S8100 Installation and Upgrades 5
November 2003
Checklists and job aids
This section contains checklists and job aids for common installation and upgrade procedures. The
checklists provide high-level summaries of the procedural steps and cross-reference other sections of this
document for additional details. The Job Aids provide the detailed steps to upgrade the S8100 system for
three upgrade scenarios.
This section contains the following checklists and job aids:
Checklists
• Initial installation on page 5
• System initialization on page 8
• Administer INTUITY AUDIX digital networking on page 11
Job aids
• Upgrade an S8100’s R10+ software using a CD on page 12
• Replace an S8100’s hard drive on page 20
• Upgrade an S8100’s R9.5 software by replacing the S8100 on page 26
Initial installation
This checklist highlights the high-level tasks for installing and cabling the cabinet to physically
connect and access an Avaya S8100 Media Server with an Avaya G600 Media Gateway or a
legacy Avaya CMC1 Media Gateway.
Installation tasks For more information
1 Verify that every site requirement is met. See Site requirements on page 58.
2 Confirm that customer’s order includes all equipment
needed.
For a G600, see Check customer’s order on page
59.
For a CMC1, see Check customer’s order
on page
343.
3 Correct shipping errors.
— Return defective and over-shipped
equipment.
Returned: ___________
Date: November 2003 ____________
— Direct short-shipped reports to National
Parts.
Report #: ___________
Sent to: ____________
For a G600, see Correct shipping errors
on page 59.
or
For a CMC1, see Correct shipping errors
on page
344.
4 Unpack and inspect equipment using lifting
precautions.
For a G600, see Unpack and inspect on page 60.
For a CMC1, see Unpack and inspect
on page 344.