Filter
Top Products
3 System initialization
Enable and disable SNMP
178 S8100 Installation and Upgrades
November 2003
Enable and disable SNMP
By default, SNMP is enabled on CMC1. If you are not using SNMP, disable it.
To disable SNMP, enter d1disable snmp from a bash session. The command d1disable snmp disables
SNMP from being run when CMC1 is started.
To enable SNMP, enter d1enable snmp from a bash session. The command d1enable snmp enables
snmp so that it automatically runs when CMC1 is started.
You must reboot your system for the SNMP settings to be effective.
Check customer option screen
From SAT, type display system-parameters customer-options and press Enter to display the system
parameters customer options screen. Ensure that the version is V10.
The license file you downloaded from RFA and installed on the switch will activate RTU features on
system parameters customer options screen. The “init” logon no longer controls access for activating an
RTU (right to use).
Please check to ensure that the default and optional features and capacities on the screen coincide with
the customer’s order. To check the relationship between what was ordered and what was populated on the
screen, please go to the RFA information page see Go to the RFA web site
on page 166. Go to the help
information section of the RFA page, where you will find a material code/feature job aid that details the
mapping between the material codes that RFA processes and the features, capacities, and release on the
systems parameters options screen. If there is a problem with the customer’s order, please contact the
account team so they can issue another order which will generate a corrected license file from RFA.