Filter
Top Products
BSet up customer logins
Communication Manager logins for customers
S8100 Installation and Upgrades 291
November 2003
5 Create 1 Windows account in the Officeuser group for download of the INTUITY Message
Manager Software.The Windows admin account should be used for Windows administration only.
The account name can be chosen as desired. For this example it is called D1WEB.
6 Disconnect from Terminal Server.
NOTE:
The Windows admin account can be used for download, but should be used for Windows
administration only.
Communication Manager logins
for customers
In addition to the logins maintained in the Windows operating system, there are customer level logins
within
Communication Manager that do NOT appear as Windows logins. The default password should
be changed by the customer during installation.
The May 2003 release of S8100 provides enhanced login/password security by adding a security feature
that allows users to define their own
Communication Manager logins/passwords and to specify a set of
commands for each login.
• The system allows up to 14 simultaneous connections (logins) to S8100. (S8100 can have 5
connections, INTUITY AUDIX can have 4 connections, and the rest of the connections are
reserved for shell commands.)
• Each S8100 login name can be customized
— Logins must be 3 to 6 alphabetic/numeric characters, or a combination of both.
— A password must be from 4 to 11 characters in length and contain at least 1 alphabetic and
1 numeric symbol.
Password aging is an optional feature that the super-user administering the logins can activate (see the
following).
NOTE:
If several users are logging in and out at the same time, a user may see the message:
Transient command conflict detected; please try later. After the users have completed
logging in or out, the terminal is available for use.
Table 51: Communication Manager customer logins
Communication
Manager
customer logins Comments
Default
password
defty1 This is the customer level “super user” login
within Communication Manager. Its use should
be restricted to the system administrator. This
login can be used to create additional
Communication Manager logins. See the
SAT command add login.