Filter
Top Products
1Install and cable a G600 cabinet
Install multipoint adapters
S8100 Installation and Upgrades 121
November 2003
Basic multipoint installation distances
Figure 39, Basic multipoint with one work location, on page 121 provides cabling information for fanout
of ISDN-BRI multipoint installations. The terminating resistor is located in the satellite closet. Every
distance assumes 24-AWG [0.26-mm
2
D-inside wire (DIW)].
Figure 39: Basic multipoint with one work location
Figure notes
1 S-interface source (TN556)
2 Terminating resistor
3 Satellite closet
4 Maximum distance from S-interface
source to work location – 1600 feet
(488 m)
5 Maximum distance from satellite closet
to work location – 250 feet (76 m)
6 System’s cabinet
7 Terminating endpoint 1
8 Terminating endpoint 2
9 Work location
10 Maximum distance from information
outlet to terminating endpoint – 33 feet
(10 m)
11 Information outlet
2
3
8
9
7
1
10
11
11
5
4
6
inst_dis RPY 01209
8