Filter
Top Products
J Install and cable a CMC1 cabinet
Install an S8100 with a CMC1 system cabinet
352 S8100 Installation and Upgrades
November 2003
Install wall-mounted cabinet
Figure 57: Left panel used as mounting template
To mount a cabinet on a wall:
1 Place the template on the wall with the top surface level.
2 Mark 2 1/8-inch (0.3-cm) pilot holes to locate the mounting holes.
3 Remove the template from the wall.
4 Drill the 2 pilot holes.
5 Thread 2 #12 × 1-inch shoulder screws partially into the holes.
6 Set the cabinet onto the wall and align the slots with the shoulder screws. See Figure 58, Typical
wall-mounted installation, on page 353. Slide the cabinet to the left to hold it in place. Tighten the
screws securely.
FLOOR
indmpnl3 KLC 110397
5" (12.7 cm)
12"
(30.5 cm)
54"
(137 cm)