Filter
Top Products
4 INTUITY AUDIX digital networking
Initial administration tasks
208 S8100 Installation and Upgrades
November 2003
.
Table 28: Initial administration tasks 1 of 2
Task Description
Screens, windows, or
commands
Complete Windows and switch
administration (normally done by
the technician at the time of
installation).
Define the machine name,
TCP/IP address, and the switch
to work with AUDIX digital
networking.
Windows Settings screens
and Switch screens
View digital networking settings.
See View the Feature Options
window on page 209.
Verify that the purchased digital
networking options are correctly
displayed.
List Configuration window
Verify or change the number of
administered remote users
(normally done by the technician
at the time of installation). See
Change number of administered
remote users on page 210.
Define the number of
administered remote users as
≥
the number of mailboxes on
every remote system.
System Parameters Limits
screen
Administer network channels
(normally done by the technician
at the time of installation). See
Administer networking channels
on page 211.
Enable the channels to create a
communication link between the
ACCX card and the switch or
the LAN card and the LAN.
Networking Channel
Administration window
Change the local machine. See
Change local machine’s
information on page 212.
Define local machine
information for digital
networking.
Machine Profile screen;
Local Machine
Administration window
Add a remote machine or change a
remote machine (normally done
by the technician at the time of
installation). See Add a remote
machine on page 216.
On the local machine, define
information about each remote
machine, including the machine
name, password, connection
type, and dial string.
Digital Machine
Administration window;
Machine Profile screen
Administer the AUDIX system on
the remote machines.
On each remote machine, define
information about the local
machine.
Remote Machine Profile
screen of the remote machine
Perform a full remote update. See
Perform a full remote update
on
page 223.
Manually run a remote update
for each remote machine to
bring the network up to date
immediately.
get remote update command
1 of 2