Filter
Top Products
3System initialization
Set country options
S8100 Installation and Upgrades 179
November 2003
Set country options
To turn off the red alarm LEDs, some of the country options must be set on the Change System-
Parameters Country-Options screen, shown in the following step.
1 Enter change system-parameters country options, and press ENTER.
A screen similar to the following displays:
The default (United States) companding mode is Mu-Law. If the country uses A-Law companding,
proceed to the next step.
2 Enter A-Law and click Enter.
NOTE:
Other items eventually need to be entered on this screen, but this is sufficient to turn the
red alarm LEDs off.
The country codes are set as needed according to the following fields:
1 Digital Loss Plan
2 Analog Ringing Cadence
3 Analog Line Transmission
4 See Table 26, Country Codes, on page 179.
Table 26: Country Codes
Country Code Country Code
USA 1 France 12
Australia 2 Germany 13
Japan 3 Czechoslovakia 14
Italy 4 Russia 15
The Netherlands 5 Argentina 16
Singapore 6 Greece 17
Mexico 7 China 18
Belgium 8 Hong Kong 19
Saudi Arabia 9 Thailand 20
United Kingdom 10 Macedonia 21
Spain 11 Brazil 22