Filter
Top Products
2Connectivity and access to an S8100 system
Access methods
S8100 Installation and Upgrades 157
November 2003
6 Make the login a member of officeadmin and Users groups, and click OK.
7 Click Dialin at the bottom of the dialog.
8 Check the Grant dialin permissions and No Call Back boxes, and click OK.
9 Click OK in the New User dialog.
10 Close User Manager.
Starting an Avaya Site Administration session
The customer must dial into the system to establish a PPP connection, and then start their Avaya Site
Administration session. To set up a computer to dial into the system, perform these steps:
1 Go to My Computer.
2 Double-click Dial-Up Networking.
3 Double-click Make New Connection.
4 Fill in the name field; the system should fill in the correct modem attached to the PC; if not,
choose the modem that is attached to the system.
5 Click Next.
6 Fill in the Area code and Telephone number for the system.
7 Click Next.
8 Click Finish in the window saying that the connection was created.
9 In the Dial-Up Networking window, right-click your connection icon.
10 Left-click Properties.
11 Click the Server Types tab.
12 In the Type of Dial-Up Server drop-down menu, select PPP: Windows 2000, 95, NT 3.5, Internet.
13 Under Allowed network protocols, only TCP/IP should be checked.
14 Click OK, when finished.
15 Access the system by double-clicking the connection icon.
16 On the Connect screen, enter the correct User name and Password.
17 Click Connect.
18 When the connection is established, a screen appears. Click the Continue box.
NOTE:
A login window bay appear saying that the connection was successful.