Filter
Top Products
Checklists and job aids
Upgrade an S8100’s R10+ software using a CD
S8100 Installation and Upgrades 19
November 2003
50 SAT – Verify that no major or minor alarms
are present.
Type display alarms.
51 SAT – Verify outgoing alarm reports link to
INADS.
Type test inads-link.
52 SAT – Save translations. Type save trans.
53 SAT – Log out of SAT, and exit LAC. a Type logoff, and respond with y to close the SAT
session.
b Type bash to go to the bash shell.
54 BS – Verify Intuity alarms. Type logsend -tTST.
55 BS – Verify GAM alarms. Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system
has called out, enter cleargamalarm all at the BASH
prompt to retire the alarm. This alarm also generates a
Maestro case that the INADS group will need to close.
56 BS – Close the bash windows. a Type exit to close the bash window.
b Type exit to close the LAC window.
57 LT-IE – Backup the translations and other
data to the PCMCIA card or to a network
location.
a Click 'Administer System'.
b Click ‘Backup & Restore’ under System
Maintenance.
c Click ‘Immediate Backup’.
d Under “Choose Items for Immediate Backup,”
select everything that is installed.
e Set Destination to PCMCIA, or click ‘Other
Location’ to backup to a network location.
f Click the Backup button.
Note: If the medium you are backing up to runs out of
space, a message will appear noting the files that didn’t get
backed up.
58 Close Internet Explorer on the S8100’s
desktop and on the laptop.
SECURITY ALERT:
!
When you are finished with the upgrade procedures, you should restore your laptop to its
original configuration, including unsharing the CD drive. When connected to a network, a
shared drive is a potential security risk.
Step Details