Filter
Top Products
Checklists and job aids
Upgrade an S8100’s R9.5 software by replacing the S8100
S8100 Installation and Upgrades 31
November 2003
37 BS – After the shutdown finishes, restart
every application.
Execute start all.
38 BS – Monitor the startup’s progress. Execute statapp.
39 Verify that call processing comes into
service.
40 Verify that voice messaging comes into
service.
41 BS – Telnet into the LAC window from the
bash.
Execute telnet 127.1 and logon using lucent3.
42 LAC – Open a SAT window. Type multivantage to open a SAT window. (The terminal
type is W2KTT.)
43 SAT – Verify that there is no translation
corruption.
If there are corrupted translations, a message will appear
when the SAT window opens.
44 SAT – Verify that no major or minor
alarms are present.
Run display alarms.
45 SAT – Verify outgoing alarm reports link
to INADS.
Run test inads-link.
46 SAT – Verify no-license/emergency
numbers.
Type change system-parameters features.
See ‘‘Administer No-License/Emergency Numbers’’
in
Installation and Upgrades for the Avaya S8100 Media Server with
the Avaya G600 and the Avaya CMC1 Media Gateways, 555-233-
146.
47 SAT – Save translations. Run save trans.
48 SAT – Logoff SAT and exit LAC. a Type logoff and respond with y to close the SAT
session.
b Type bash to go to the bash shell.
49 BS – Verify Intuity alarms. Type logsend -tTST.
50 BS – Verify GAM alarms. Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system has
called out, enter cleargamalarm all at the BASH prompt
to retire the alarm. This alarm also generates a Maestro case
that the INADS group will need to close.
51 BS – Close the bash windows. a Type exit to close the bash window.
b Type exit to close the LAC window.
Step Details