Filter
Top Products
3System initialization
INTUITY AUDIX administration
S8100 Installation and Upgrades 195
November 2003
3 Enter the data for the subscriber on page 1 of the Add Subscriber form as detailed in Table 27,
Field definitions for Add Subscriber screen, page 1, on page 195.
The Add Subscriber form, page 1 displays:
4 Press F3 to save the information.
When adding subscribers to INTUITY AUDIX, the preferred method is to first set up a Class of Service
(COS) for a group of INTUITY AUDIX subscribers. Using this method, the data is filled in for you on
page 2 of the Add Subscriber form. The following is an example of page 2 of the Add Subscriber form.
monroe Active Alarms: wA Logins: 1
add subscriber 2600 Page 1 of 2
SUBSCRIBER
Name: Jones, John Locked? n
Extension: 2600 Password:
COS: class01 Miscellaneous 1:
Switch Number: Miscellaneous 2:
Community ID: Miscellaneous 3:
Secondary Ext: Miscellaneous 4:
Account Code: Covering Extension:
Broadcast Mailbox?
Email Address:
Press [ENTER] to execute or press [CANCEL] to abort
enter command: add subscriber 2600
Table 27: Field definitions for Add Subscriber screen, page 1
Field Valid input Description
Name Subscriber’s Name This is the name of the subscriber. In the example above:
Jones, John
Extension Extension number This is the extension number assigned on Communication
Manager for the subscriber.
Password Can be alpha or numeric Subscriber’s password. Input a temporary password and
instruct the new subscriber to change their password when
they log into INTUITY AUDIX.
COS class00 to class11 Class of service; contains features that an INTUITY
AUDIX subscriber could be enabled to use. Set up the
Class of Service on the system before adding subscribers.