Filter
Top Products
3 System initialization
INTUITY AUDIX administration
194 S8100 Installation and Upgrades
November 2003
Save translations
1 Enter save translation, and press Enter. This instructs the system to take all translation
information in memory and write it to the translation cards.
2 Update backup cards, if necessary.
INTUITY AUDIX administration
This section provides information about INTUITY AUDIX commands and administering INTUITY
AUDIX. For additional information about INTUITY AUDIX administration, refer to the AUDIX
Administration PDF files on the Documentation CD and DEFINITY ONE Communications System
AUDIX Administration Command Line Quick Reference Card (555-233-737).
INTUITY AUDIX commands
Commands available to change system settings and subscriber information in the INTUITY AUDIX
application are executable from the INTUITY AUDIX command prompt. You can access the INTUITY
AUDIX command prompt from the Avaya Site Administration or Telnet interface. To view a list of
commands, press F6 (or press the “choices” tab). The following INTUITY AUDIX screen displays:
Adding an INTUITY AUDIX subscriber
After completing the machine level translations, subscribers must be added to the S8100 system. The
following forms detail the addition of INTUITY AUDIX subscribers. Enable the INTUITY AUDIX
forms via Avaya Site Administration or Telnet.
1 Start at the INTUITY AUDIX command prompt.
2 Enter the command Add Subscriber and the extension number that the new subscriber will use.