Filter
Top Products
4 INTUITY AUDIX digital networking
Change local machine’s information
218 S8100 Installation and Upgrades
November 2003
4 When you finish entering information for a remote machine, click Save.
The system adds the information and displays a confirmation message.
5 Add another remote machine, if necessary.
Message
Transmission
Schedule
24-hour clock time
in the format hh:mm
Start Time – Enter the starting time for a message
transmission period to the remote system, such as 00:01 for 1
minute after midnight.
End Time – Enter the ending time for a message transmission
period to the remote system, such as 23:59 for 1 minute before
midnight.
Interval – Enter the interval at which the local AUDIX
system will call this remote system, such as 00:05 for every 5
minutes. The AUDIX system checks the queue at this interval
and calls the remote system if something is in the queue for this
remote system.
Stagger start times and intervals for each remote system so the
local AUDIX system does not try to call every remote system at
the same time.
Password 5- to 10-digit
alphanumeric
characters
Enter the password exactly as it is administered on the remote
system.
Send
Multimedia
Messages?
yes
no
Select yes if the remote machine will accept multimedia
messages (such as fax and text messages).
Select no if the remote machine will not accept multimedia
messages.
Machine
Type
See description at
right
Enter the machine type.
To see a list of valid machine types, click the drop-down arrow
and select the appropriate machine type from the available
types.
Table 31: Field definitions – Digital Machine Administration window 2 of 2
Field Valid input Procedure/Description
2 of 2