Filter
Top Products
Checklists and job aids
Replace an S8100’s hard drive
24 S8100 Installation and Upgrades
November 2003
30 LAC – Exit the LAC window and bash shell. a Type exit, and close the telnet window.
b Type exit to close the bash window.
31 SDT – Open Internet Explorer on the S8100’s
desktop and log in.
a Double-click the IE icon on the S8100’s desktop.
b Click ‘Administer System’.
c Login using lucent3.
d Click Continue on the Notice page.
32 SDT-IE – Restore the translations and other
backed-up data to the hard drive.
Note: The Windows logins of vm, sa, browse,
and NTadmin are reset to their factory defaults.
The customer should reset these passwords and
reinstall other Windows accounts they may have
created.
a Click ‘Administer System.’
b Click ‘Backup & Restore.’
c Click ‘Restore.’
d Select the Source for the restore – The
Destination or Other location you entered for the
backup in Step 12
.
e Click the Continue button. Under “These items
will be restored from ... “, every item that was
backed up to the location specified in Step d
will
be selected.
f Click the Restore button.
Note: If you backed up AUDIX announcements in Step
12, you must do two restores. After the first restore,
repeat the steps above using the location of the backed up
AUDIX announcements for the Source in Step d
.
33 SDT-IE – Close Internet Explorer.
34 SDT – Open a bash shell. Click Start → Run → bash.
35 BS – Shutdown every application. Execute shutdown all.
36 BS – After the shutdown finishes, restart every
application.
Execute start all.
37 BS – Monitor the startup’s progress. Execute statapp.
38 Verify that call processing comes into service.
39 Verify that voice messaging comes into service.
40 BS – Telnet into the LAC window from the
bash.
Execute telnet 127.1 and logon using lucent3.
41 LAC – Open a SAT window. Type multivantage to open a SAT window. (The
terminal type is W2KTT.)
42 SAT – Verify that there is no translation
corruption.
If there are corrupted translations, a message will appear
when the SAT window opens.
43 SAT – Verify that no major or minor alarms are
present.
Run display alarms.
44 SAT – Verify outgoing alarm reports link to
INADS.
Run test inads-link.
Step Details