Filter
Top Products
3System initialization
Set up country-specific call- progress tones
S8100 Installation and Upgrades 177
November 2003
5 Enter d1stat.
Confirm the following results:
CornerStone PARTIALLY UP
Audix DOWN
AudixNet DOWN
If any of these 3 systems are still UP, repeat steps 3 to 5.
6 Enter: cd //c/lucentsoftware/cornerstone/asp/dsp0.
This moves you to the directory where the active tone detector file is, dsp0.USA.
7 Enter pwd to confirm you are in the correct directory.
The path of the current directory displays.
8 To verify the mvdsp.sh script is present, enter ls.
If you do not see the mvdsp.sh script, contact Tier-3 or -4 personnel for assistance.
9 Enter . mvdsp.sh to execute the mvdsp.sh script.
The following line displays:
Select dsp file [AUSTRALIA|BRAZIL|CANADA|MEXICO|UK|OTHER]:
NOTE:
You can exit from the script at any time by pressing Ctrl C.
10 In all-capital letters, enter one of the displayed countries or OTHER.
If you entered OTHER, you are prompted to enter the name of your country in all-capital letters.
Make certain a tone detector file exists for your country and you enter it correctly.
NOTE:
If you enter in an unrecognized country, you are returned to the prompt to enter a valid
country name.
Your country’s translation file for call-processing tones is copied into “dsp0.USA”. Meanwhile,
the old “dsp0.USA” file is saved as “dsp0.USA.sav” in case you need to restore these settings.
You are successful when the “dsp file successfully copied” message displays. It is now safe to
start CornerStone and AUDIX.
11 Use the log file to confirm successful completion.
12 Enter start CornerStone.
The message “addproc succeeded” displays upon successful completion.
This command will start AUDIX as well as CornerStone.
13 Enter d1stat to confirm that CornerStone and AUDIX are UP.
Call processing will now be based on the tones specific to your country.