Filter
Top Products
J Install and cable a CMC1 cabinet
Correct shipping errors
344 S8100 Installation and Upgrades
November 2003
Correct shipping errors
1 Red-tag any defective or over-shipped equipment, and return it according to instructions from
National Parts.
2 Direct any short-shipped reports to National Parts. Contact the appropriate location for specific
instructions. For a streamlined implementation, call 1-800-772-5409.
Unpack and inspect
!
DANGER:
Use lifting precautions! A fully loaded CMC1 weighs 58 lbs (26.3 kg). If the doors,
power unit, and circuit packs are removed, the CMC1 unit weighs only 29 lbs (13.1
kg).
1 Verify the equipment received. See Figure 54, Equipment packed with a single CMC1, on page
345. Actual equipment may vary in appearance and may ship in separate packages. Equipment
comcodes are listed in Table 59, Comcodes for equipment used with CMC1,
on page 346.
2 Before mounting the cabinet, remove the CMC1 cabinet’s doors by opening and then lifting them
straight up and off the hinge pins.