Filter
Top Products
About this book
Using this book
48 S8100 Installation and Upgrades
November 2003
Using this book
This book provides step-by-step procedures for installing or upgrading S8100 systems that implement the
Communication Manager features..
Checklists The initial checklists summarize the steps for several common installation
procedures – installing and initializing an S8100 system and for
administering INTUITY AUDIX digital networking.
Each step provides a link to more detailed information later in the book.
Job Aids The following Job Aids summarize the steps for several common upgrade
procedures – for pre-R10 systems (replacing the processor board), for R10
or later (replacing the hard drive), and for R10 or later (new software on a
CD-ROM).
An experienced technician can use a Job Aid as stand-alone documentation.
Chapter 1 Use this chapter to initially install and cable an S8100 with G600.
Chapter 2 This chapter describes the procedures for connecting to and accessing an
S8100 server.
Chapter 3 This chapter describes the procedures for initializing the S8100 system,
including the installation of the license file, password file, and installation
script file, and other system services.
Chapter 4 Use this chapter to administer INTUITY AUDIX digital networking.
Chapter 5 Use this chapter along with the job aids to upgrade or repair an S8100
system.
Chapter 6 Use this chapter to add or upgrade a circuit pack’s hardware and software or
to administer the features provided by a new circuit pack.
Chapter 7 Use this chapter to set up Avaya Site Administration.
Chapter 8 Use this chapter to install Message Manager.
Chapter 9 This chapter provides some troubleshooting information for problems that
may occur during installation of an S8100 server or an external modem.
Chapter 10 This chapter briefly describes the copy-protection aspects of an S8100
media server’s software.
Appendix A This appendix lists pinout information for the essential circuit packs and
cables.
Appendix B Refer to this appendix when setting up a customer’s logins or when
installing Avaya Site Manager or Message Manager.
Appendix C This appendix contains procedures for several installation and maintenance
tasks not covered elsewhere in the book.
Appendix D Use this appendix when performing shutdown and reset/reboot procedures.
Appendix E This appendix describes the TN2314 processor’s LED boot sequence and
LED states.
Appendix F This appendix provides information about an S8100 system’s status LEDs.
Appendix G This appendix summarizes the Bash and LAC commands.