Filter
Top Products
2Connectivity and access to an S8100 system
Physical connections
S8100 Installation and Upgrades 143
November 2003
6 Click the Access Control tab.
NOTE:
Before continuing, record the current settings on the Access Control tab. This information
is needed to restore the laptop after work is finished with the S8100 system.
7 Ensure that Share Level Access Control is selected.
8 Click OK.
Click Yes if the following message displays: Do you want all connections to shared directories
disabled? The connections are restored following a restart. Click No when asked whether to
restart your computer now.
9 Right-click Network Neighborhood and select Properties to return to the Network dialog.
10 Select TCP/IP Xircom CreditCard Ethernet Adapter 10/100.
11 Click Properties.
The TCP/IP Properties dialog displays.
NOTE:
Before continuing, record the current settings from each of the TCP/IP Properties tabs.
This information is needed to restore the laptop after work is finished with S8100 with a
G600 or CMC1.