Filter
Top Products
4 INTUITY AUDIX digital networking
Change local machine’s information
222 S8100 Installation and Upgrades
November 2003
5 Complete the fields in this window using the information provided in
Table 33, Field definitions; remote machine profile screen, page 2,,
on page 222.
6 Press F3 [Enter] to save the information.
The cursor returns to the command line, and the system displays the following message:
Command Successfully Completed.
7 Press F3 [Cancel] to return to the command line.
8 Enter exit or another administrative command at the enter command: prompt.
Table 33: Field definitions; remote machine profile screen, page 2,
Field Valid Input Description
Send to Non-
Administered
Recipients?
y= yes
n = no
Enter y if the system will attempt to deliver messages to
unadministered remote recipients.
Enter n if messages cannot be sent to unadministered
recipients.
Updates:
In?
y= yes
n = no
Enter y if the local system will accept updated database
information from the remote system (the Updates Out
field must also be set to y on the local Machine Profile
screen).
Set to y only after testing the network end-to-end during
initial administration.
Updates:
Out?
y= yes
n = no
Enter y if the local system will send updated database
information to the remote system (the Updates In field
must also be set to y on the local Machine Profile screen).
Set to y only after testing the network end-to-end during
initial administration.
Network
Turnaround
y= yes
n = no
If you are conducting an acceptance test, enter n.
After the acceptance tests, enter y if a network connection
that originated from this remote system is allowed to turn
around after the remote system has sent all of its network
data to the local system.
The local system may then return update information,
voice mail, and status on the same connection. This feature
reduces toll charges and increases the efficiency of the
system in networks with more than 10 machines.
The Network Turnaround field must be set to y on the
local Machine Profile screen for this feature to work
between the local system and the remote system.