Filter
Top Products
C Miscellaneous procedures
Enable/disable embedded messaging
314 S8100 Installation and Upgrades
November 2003
The following screen displays:
5 After the restore finishes, reboot the system.
NOTE:
A reboot is required. The restored translations will not be used if the S8100 is not
rebooted.
Enable/disable embedded messaging
S8100 supports the capability to disable and enable the embedded INTUITY AUDIX messaging system.
Configured from the administration web pages, a disable/enable link allows the user to toggle between
active/inactive on-board messaging capability. When the embedded message is active, a ‘disable
messaging’ link is present. When the embedded messaging in inactive, the ‘enable messaging’ link is
present, and every web page’s reference to INTUITY AUDIX messaging is removed. In the active
messaging state, the appropriate backup-restore pages display the various INTUITY AUDIX backup
options, whereas in the inactive messaging state, the web pages are modified to not display the message-
related backup options.
Impact on maintenance
When INTUITY AUDIX is disabled on the system, the ports on the CWY1 board become unavailable.
As a result, maintenance is disabled for the CWY1 board. To counteract this and enable maintenance for
the CWY1 board, at least one port on the board must be administered.
Perform the following steps to enable maintenance for the CWY1 board when INTUITY AUDIX is
disabled:
1 Add a station using the next available extension:
(For example, if using the Avaya Site Administration tool, click Add station, and click Next.
2 Enter 1A1201 in the Port field.
3 Enter 2500 in the Type field.
4 Enter CWY1 Test Port in the Name field.
5 Submit the form.
6 Perform a test port 1A1201 command, and verify that the test passes.