Filter
Top Products
2Connectivity and access to an S8100 system
Physical connections
S8100 Installation and Upgrades 145
November 2003
f Click the Connect button (leave the Server: window blank).
g Click OK if an error message appears.
h Login using lucent3 for the login ID and password.
You should now be at the S8100 Windows desktop.
2 Connect back to the laptop’s CD-ROM drive.
a On the S8100’s desktop, click Start → Run and type in the path to the laptop’s CD-ROM:
\\192.11.13.5\<laptop’s CD-ROM share name>
where <laptop’s CD-ROM share name> is the name you assigned to the laptop’s CD-
ROM drive when you shared it in the previous procedure (for example, “Laptop CD-
ROM”).
b You should now have access to the contents of the laptop’s CD-ROM.
You can now copy files from the laptop’s CD to the S8100 server’s hard drive.
Restore the laptop’s settings (laptop running
WINDOWS 95)
When finished with an installation or upgrade, use this procedure to restore the settings on the
technician’s laptop to their original state.
1 Right-click Network Neighborhood. Select Properties.
The Network dialog displays.
2 Click the Configuration tab.
3 Click the File and Print Sharing button and select the I want to be able to give others access to my
files box.
4 Choose Client for Microsoft Networks from the Primary Network Logon list.
5 Click the Identification tab and enter the computer name and workgroup.
6 Click the Access Control tab and check the appropriate boxes so that this dialog matches its
earlier settings.
7 Click the Configuration tab.
• If a dialog appears notifying you that the security provider could not be found, click Yes.
• If the Authenticator type dialog appears, select Windows 2000 Domain, and click OK.
8 Double-click the modified component in the Network Components list. This should be the
TCP/IP Xircom CreditCard Ethernet Adapter 10/100.
9 The TCP/IP Properties dialog displays.
10 Enter the original IP address and subnet mask.
11 Click the DNS Configuration tab to enable DNS. Enter the appropriate information.
12 Click the WINS Configuration tab to enable WINS. Enter the appropriate information.
13 Click the Gateway tab (if a gateway was used) and enter the appropriate information.
14 Click OK to close the TCP/IP dialog.
15 Click Yes to restart your computer.
When rebooted, the laptop returns to its original settings.