Filter
Top Products
6Hardware additions
Add Tie trunks
S8100 Installation and Upgrades 237
November 2003
Installation
1 Determine the port assignment of the trunk from Trunk Group form.
2 Install a DID Trunk circuit pack in assigned carrier slot (if an additional circuit pack is required).
3 Administer forms listed under “DID Trunk Group” in Administrator’s Guide for Avaya
Communication Manager (555-233-506).
Add Tie trunks
Requirements
Each tie trunk connects to 1 port of a 4-port Tie Trunk circuit pack or to an assortment of international Tie
Trunk circuit packs.
Installation
1 Determine the port assignment of the trunk from Trunk Group form.
2 Install a Tie Trunk or an international Tie Trunk circuit pack in assigned carrier slot (if an
additional circuit pack is required).
3 For customer-owned (not leased) tie-trunk facilities (such as campus environments), Tie Trunk
circuit packs provide signaling capabilities beyond those specified by the industry-wide E&M
standard. Use Figure 48, Tie Trunk circuit packs (component side),
on page 238 and Table 34, Tie
trunk option-switch settings and administration, on page 238 to choose the preferred signaling
format, set switches on the circuit pack, and administer the port.
4 Administer forms listed under “Tie Trunk Group” in the Administrator’s Guide for Avaya
Communication Manager (555-233-506).
EXAMPLE: Port number 1 A 07 01
Cabinet Carrier Slot Circuit
(Port network) (or compact modular
cabinet)
EXAMPLE: Port number 3 A 02 01
Cabinet Carrier Slot Circuit
(Port network) (or compact modular
cabinet)