Filter
Top Products
JInstall and cable a CMC1 cabinet
Install an S8100 with a CMC1 system cabinet
S8100 Installation and Upgrades 353
November 2003
Figure 58: Typical wall-mounted installation
7 Drill 2 lower mounting holes using the cabinet as a template.
8 Thread the 2 lower screws and tighten.
!
WARNING:
Ensure that the right bottom safety screw is in place and tight.
I
Figure notes
1 #12 × 1-inch shoulder screws 2 #12 × 1-inch safety screw
A
2
1