Filter
Top Products
4INTUITY AUDIX digital networking
Administer networking channels
S8100 Installation and Upgrades 211
November 2003
3 Enter the number of remote users in the Administered Remote field.
4 Press F3 to save the information in the system database.
The cursor returns to the command line, and the system displays the following message:
Command Successfully Completed.
5 Enter exit or another administrative command.
Administer networking channels
Enable the network channels so that the local AUDIX system can exchange voice messages over the
digital network. Enabling the channels creates a communication link between the ACCX card and the
switch or between the LAN card and the LAN and/or the wide area network (WAN).
To enable the network channels:
1 Start at the S8100 main page from Internet Explorer, and select Administer System → AUDIX
Networking
→ Administrative Menu → Network Channel Administration.
The system displays the Network Channel Administration window:
2 Click Enable for each channel in the Channel Configuration column.
3 Click Save.
The system takes a few seconds to change the hardware configuration. The system displays a
confirmation message when the process finishes.