Filter
Top Products
Checklists and job aids
Replace an S8100’s hard drive
S8100 Installation and Upgrades 25
November 2003
45 SAT – Verify no-license/emergency numbers. Type change system-parameters features.
See ‘‘Administer No-License/Emergency Numbers’’ in
Installation and Upgrades for the Avaya S8100 Media
Server with the Avaya G600 and the Avaya CMC1 Media
Gateways, 555-233-146.
46 SAT – Save translations. Run save trans.
47 SAT – Logoff SAT and exit LAC. a Type logoff and respond with y to close the SAT
session.
b Type bash to go to the bash shell.
48 BS – Verify Intuity alarms. Type logsend -tTST.
49 BS – Verify GAM alarms. Type wrntevent GAM 0 9991.
Note: This causes a Major GAM alarm. After the system
has called out, enter cleargamalarm all at the BASH
prompt to retire the alarm. This alarm also generates a
Maestro case that the INADS group will need to close.
50 BS – Close the bash windows. a Type exit to close the bash window.
b Type exit to close the LAC window.
51 LT-IE – Backup the translations and other data
to the PCMCIA card or to a network location.
a Click 'Administer System'.
b Click ‘Backup & Restore’ under System
Maintenance.
c Click ‘Immediate Backup’.
d Under “Choose Items for Immediate Backup,”
select everything that is installed.
e Set Destination to PCMCIA, or click ‘Other
Location’ to backup to a network location.
f Click the Backup button.
Note: If the medium you are backing up to runs out of
space, a message will appear noting the files that didn’t
get backed up.
52 Close Internet Explorer on the S8100’s desktop
and on the laptop.
SECURITY ALERT:
!
When you are finished with the upgrade procedures, you should restore your laptop to its
original configuration.
Step Details