Filter
Top Products
3 System initialization
Set up country-specific call- progress tones
176 S8100 Installation and Upgrades
November 2003
12 In the Dial-Up Networking window, right-click your connection icon.
13 Click Properties.
14 Select the Networking tab.
15 In the Type of Dial-Up Server drop-down window, select PPP: Windows 95/NT 4/200, Internet.
16 Under Allowed network protocols, only TCP/IP should be checked.
17 Click OK when finished.
18 Access the system by double-clicking the connection icon.
19 On the connect screen, type in User name and Password.
20 Click Connect.
21 When the connection occurs, a screen opens. Click the Continue box.
22 A login window may appear, saying that the connection was successful. Click OK.
The dial-up connection drops down to the tray on the taskbar next to the Time.
23 Once the dial-up connection is established, return to step 1 of the previous section.
Set up country-specific call-
progress tones
By default, the call-progress tones of the United States are used for each S8100 system. Using the
mvdsp.sh shell script, you can change the system so that it recognizes the call-progress tones specific to
your country.
The system gets it’s translation of call-progress tones from a file named dsp0.USA. You can overwrite
this file with one that contains translations that are appropriate for your country.
To set up country-specific call-progress tones:
1 Start a Telnet session.
For more information, see Start a Telnet session
on page 162.
2 Go to a LAC prompt and execute a bash shell.
For more information, see Appendix G, “GAS commands in bash”
.
3 At the BASH prompt, enter shutdown Audix.
The bash shell is case-sensitive, so be sure to capitalize the first letter in Audix.
It will take a few minutes for AUDIX to shutdown, please be patient. A status message of
“shutdownproc succeeded” displays when the shutdown finishes.
4 Enter shutdown CornerStone.
The bash shell is case-sensitive, so be sure to capitalize the C and S in CornerStone.
This process should finish very quickly. A status message of “shutdownproc succeeded” displays
when the shutdown finishes.