Filter
Top Products
4INTUITY AUDIX digital networking
Change local machine’s information
S8100 Installation and Upgrades 219
November 2003
Complete the Machine Profile screen for the
remote machine (via AUDIX)
Use the Machine Profile screen to enter networking information required for each remote machine, such
as address ranges and remote update information.
To enter networking information on the Machine Profile screen:
NOTE:
The Digital Machine Administration window must be completed for a remote machine
before completing the Machine Profile screen for that machine.
1 Start at the AUDIX command prompt screen.
2 Enter change machine remote_machine_name at the enter command: prompt.
The system displays the Machine Profile screen for a remote machine, page 1:
NOTE:
If you do not know the names of the remote machines, enter list machines at the enter
command: prompt. The system displays a list of every machine administered on the
system.
3 Complete the fields in this window using the information provided in
Table 32, Field definitions; remote machine profile screen, page 1,,
on page 220.
NOTE:
The Machine Name, Type, Location, and Voice ID fields are display only and cannot be
changed.