Filter
Top Products
1 Install and cable a G600 cabinet
Cable a G600 system
82 S8100 Installation and Upgrades
November 2003
Figure 15: TDM-/LAN-bus cable routing slot plate removal
5 Pull open the EMI gasket, and pass the TDM-/LAN-bus cable through the routing slots in both
cabinets. Push the free end of the EMI gasket back in place. See Figure 16, TDM-/LAN-bus cable
routed from Cabinet A to Cabinet B, on page 83.
!
WARNING:
Be sure to install each TDM-/LAN-bus cable connector with the arrow on its back pointing upward.
6 Install the lower connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet A.
7 Install the upper connector of the TDM-/LAN-bus cable on the right TDM-/LAN-bus pin field in
Cabinet B.
Figure notes
1 Cabinet B’s routing slot plate. 2 Cabinet A’s routing slot plate.
cadptdm3 KLC 102600
A
B
TO
P
TO
P
1
2
2
1