Filter
Top Products
Contents
46 S8100 Installation and Upgrades
November 2003
• Check AC power and ground for CMC1 357
Check AC power 357
Approved grounds 358
Approved floor grounds 358
Uninterruptible power supply 359
Cabinet’s power switch 359
Connect cabinet’s grounds and other grounds 360
Install the ground block and ground wire on cabinets 360
Install coupled bonding conductor 364
Connect and route the power cords 364
• Cable a CMC1 system 367
Install Processor Interface cable and TDM-/LAN-bus terminators 367
Cable 3-cabinet CMC1 system 368
Vertically mounted system 368
Vertically and horizontally mounted system 369
• Install CMC1 main distribution frame (MDF) and external modem 370
Install the MDF on CMC1 370
Bottom-mounted MDF with modem 370
Install the external modem 371
• Install equipment-room hardware for CMC1 372
Cross-connect the cabinet to the MDF 372
Allowed circuit packs 372
Disallowed circuit packs 375
Circuit pack installation 377
Circuit-pack slot loading 377
Off-premises circuit protection 380
Install sneak fuse panels 381
Label the main distribution frame 383
• Set ringing option for CMC1 385
K Identify a hard disk for PCN1413b 387
Glossary 391
Index 401