Filter
Top Products
1 Install and cable a G600 cabinet
Install the BRI terminating resistor
118 S8100 Installation and Upgrades
November 2003
Figure 36: Typical installation of terminating-resistor block
For point-to-point wiring, the top row connects to the blue station field. The pair connects from the
110RA1-12 to the standard 4-pair circuit. Pair 1 from the 110RA1-12 connects to Pair 1 of the station
field, and Pair 2 connects to Pair 3 of the station field.
Connect row B (output) to the 2
nd
terminal common to the multipoint circuit to accommodate basic 2-
terminal multipoint applications.
Figure notes
1 Part of terminating-resistor block
2 White or purple field
3 Part of 4-pair blue field
4 From ISDN T-interface circuit (2-
pair)
5 To ISDN S/T-interface terminals
6 2-pair cross-connect
7 Basic multipoint option
8 4-pair horizontal cables
9 Row “A”
10 Row “B”
11 Row “C”
TT1R R1
term_blk RPY012098
3
4
5
1
6
6
2
9
11
7
8
10