Filter
Top Products
6 Hardware additions
Add C-LAN functionality
232 S8100 Installation and Upgrades
November 2003
3 Type change ip-interfaces and press Enter.
NOTE:
Do not change the Enabled field to y until all of the information in the row is completed.
4 Fill in a row for each TN799DP circuit pack installed.
Use the same node name assigned on the Node Names screen. You can press Help in the Node
Name field to display every valid node name. Use the gateway address for the router connected to
the hub; not the hub.
5 Type y in the Enabled field for each completed row.
6 Type change IP services and press Enter.
Do not change the Enabled field to y until all of the information in the row is completed.
7 Fill in the following fields:
• Service Type: xxx
• Local Node: slot location of the TN799DP
• Local Port: any open port, generally 9001 or higher
• Remote Node: a specific PC node name assigned on the IP Interfaces screen. Do not type
any
• Remote Port: xxx
8 Type y in the Enabled field for each completed row. Enabling the local node turns on the listen
socket.
Test the external connection to the LAN
To test the external IP connections, ping the C-LAN server and ping a known computer connected to your
network. If everything is configured correctly, the Result column on the Ping Results screen reads pass.
If it reads abort, verify the IP-address information and check the connectivity, including the cabling.
change ip-interfaces Page 1 of 4
IP INTERFACES
Inter-region IP connectivity allowed? n
Enable Net
Eth Pt Type Slot Code Sfx Node Name Subnet Mask Gateway Address Rgn
n C-LAN 01A09 TN799 B clan-a1 255.255.255.0 192.168.10 .21 1
n C-LAN 01B03 TN799 B ppp10 255.255.255.0 135.9 .167.179 1
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .