Filter
Top Products
1 Install and cable a G600 cabinet
Unpack and inspect
60 S8100 Installation and Upgrades
November 2003
Unpack and inspect
!
DANGER:
Use lifting precautions. An empty G600 weighs 35 – 39 lbs (15.8 – 17.6 kg).
1 Verify the equipment received. See Figure 1, Equipment packed with a single G600 cabinet, on
page 61. Actual equipment may vary in appearance and may ship in separate packages.
Equipment comcodes are listed in Table 3, Comcodes for equipment used with G600,
on page 63.
2 Before mounting the G600, remove the door by opening and then lifting it straight up and off the
hinge pins.
NOTE:
The G600’s power cord, software and documentation CDs, Processor Interface cable,
wrist strap, and cabinet’s feet are shipped inside the cabinet’s accessory compartment. See
Figure 1, Equipment packed with a single G600 cabinet,
on page 61. The optional G600
port cabinet is shipped with AC power cord or international power-cord kit, mounting kit,
TDM-/LAN-bus cable, and EMI gasket.