A SERVICE OF

logo

J Install and cable a CMC1 cabinet
Install an S8100 with a CMC1 system cabinet
356 S8100 Installation and Upgrades
November 2003
Install left and right panels – wall mount
Figure 61: Left and right panel installation
1 Align the cutouts in the panels with the cabinet’s hinges.
2 Drill a 1/8-inch (3-mm) pilot hole into the wall and secure the panels with the #12 × 1-inch
shoulder screws.
3 Proceed to Check AC power and ground for CMC1 on page 357.
Figure notes
1 Left panel 2 Right panel
indmins3 KLC 082002
1 2